collect sensor data with matkab online in matlab

To collect sensor data in Matlab online, you first need to identify what type of sensor you will be using and its communication protocol. Once you have this information, you can connect the sensor to your online Matlab session using either the built-in support for serial communication or by using a third-party library.

Here's an example of how to collect data from a simple temperature sensor using the Arduino microcontroller and serial communication:

main.m
% Define the serial port and baud rate
port = 'COM3'; % replace this with the appropriate port number
baudrate = 9600;

% Connect to the serial port
s = serialport(port, baudrate);

% Loop to read data continuously
while true
    % Read a single line of data from the serial port
    data = readline(s);
    
    % Convert the data to a numerical value
    value = str2double(data);
    
    % Display the value in the Matlab command window
    disp(value);
end
462 chars
19 lines

In this example, we first define the serial port and baud rate to match the settings on our Arduino board. We then connect to the serial port using the serialport function. Finally, we enter a loop to continuously read data from the serial port using the readline function, convert the data to a numerical value using str2double, and display the value in the Matlab command window using disp.

This is just a simple example, but the same basic approach can be used for more complex sensors and communication protocols. For example, if you are using a wireless sensor network, you may need to use a third-party library such as the MATLAB Support Package for Arduino Hardware or the MATLAB Support Package for Raspberry Pi Hardware.

gistlibby LogSnag