give pulsating dc as input to current source in matlab in matlab

One way to input a pulsating DC signal to a current source in MATLAB is by using the "square" function. The "square" function generates a square wave with user-defined amplitude, frequency, and duty cycle. Here is an example code snippet that shows how to generate a 10 Hz pulsating DC signal with an amplitude of 0.5 A and 50% duty cycle:

main.m
% Define time vector
t = 0:0.01:1;

% Define pulsating DC signal parameters
amplitude = 0.5;    % A
frequency = 10;     % Hz
duty_cycle = 50;    % %

% Generate pulsating DC signal
pulsating_dc = amplitude * square(2*pi*frequency*t, duty_cycle);

% Input pulsating DC signal to current source
my_current_source(pulsating_dc);
326 chars
14 lines

In this example, the time vector "t" ranges from 0 to 1 second with a step size of 0.01 s (100 Hz sampling rate). The "square" function generates a square wave with a frequency of 10 Hz and 50% duty cycle, which is then multiplied by the amplitude of 0.5 A to obtain the pulsating DC signal. Finally, the pulsating DC signal is input to a hypothetical current source "my_current_source" for the desired application.