initialisation of sdio on stm32 in matlab

To initialize the SDIO interface on STM32 using MATLAB, you can use the following code:

main.m
% define SDIO parameters
sdio_info.ClockEdge = 'rising';
sdio_info.ClockBypass = 0;
sdio_info.ClockPowerSave = 0;
sdio_info.BusWide = '1b';
sdio_info.HardwareFlowControl = 0;
sdio_info.ClockDiv = 16; % adjust clock speed as per your requirements
 
% initialize SDIO hardware interface
h_sdio = stm32.SDIO('sdiob',sdio_info);
325 chars
11 lines

This code initializes the SDIO interface on the 'sdiob' channel of the STM32 microcontroller using the specified parameters in 'sdio_info' structure. You can modify the parameters to suit your application needs.

Make sure to install the MATLAB add-on for STM32 support and setup the STM32 Hardware connection in MATLAB before executing the above code.